Rough Terrain 45 Ton Hydraulic Crane |
| Inspection Items | OSHA Standard (1926.550) | ANSI Standard (B30.5) |
Outriggers
1. Lubrication
2. Structural Condition
3. Pressure Hoses/Connections |
| 5-1.9.9
5-2.1.3
5-2.1.2 |
Turntable/Crane Body
1. Ensure Level/Stability
2. Wear/Gear/Teeth/Rollers
3. Cracks
4. Bolts/Ensure Securely Attached |
| 5-1.1
5-1.2 |
Counter Weight
1. Proper Size
2. Attachment Connection/Bolts
|
| 5-3.4.2 |
Engine Housing
1. Cleanliness/No Rags/Trash
2. Gear/Machinery Guards
3. Clear Access/Walkways
4. Brakes/Clutch Adjustments
5. Hand Signal Illustration
6. Swing Break | (a)(8)
(a)(13)(ii) & (iii)
(a)(4) | 5-1.9.6
5-1.8.2
5-2 (Fig 16)
5-1.4 |
Cab
1. Glass/Visibility
2. Instruments and Controls
3. Functioning Horn (warning signal)
4. Fire Extinguisher
5. Appropriate Load Charts and Warning Signs
6. Proper and Adequate Access (steps/walkway) | (a)(12)
(a)(14)(i)
(a)(2)
(a)(13) & (a)(13)(iii) | 5-5.1.6.11
5-3.4.9
5-5.1.1.3
5-1.8.2 & 3 |
Drum
1. Proper Size and Spoiling of Hoistlines
2. Drum Sides/Shields for Cracks
3. Dogs/Pawls/Locking Devices
4. Drum Rotation vs. Control Motion |
| 5-1.3.1 & 2 |
Boom Sections
1. Boom Stops
2. Hoist Line Guides/Sheaves
3. Jib Attachment/Backstops/Belly Slings | 550(b) | 5-2.1.3 |
Sheave System
1. Ensure hoist line and sheave size match
2. Worn
3. Lubrication/Move freely |
| 5-1.7.4 |
Load/Auxiliary Hook and Block System
1. Sheaves Function Smoothly
2. Hook Rotates Freely/Lubricated
3. Proper Becket
4. Properly Reeved |
| 5-1.7.1-6 |
Wire Rope/Hoist Line
1. Overall condition
2. End Connections
3. Lubrication
4. Clips | (a)(7)
(a)(7)(v) | 5-1.7.6 |
Safety Devices
1. Anti-Two Block Devices
2. Boom Backstop Devices
3. Swing Radius Warning Devices
4. Job or Site Specific Devices/system | (a)(9)
(a)(15) | 5-1.1.9
5-2 (Fig 17) |
Additional References:
550(a)(1) Crane used in accordance with manufacturers specification
550(a)(5) Inspection: Competent Person
550(a)(6) Annual Inspection Record
550(a)(16) No modifications without written approval of manufacturer |
