| Users |
508 |
| Products |
605 |
| Reviews |
14 |
| Views |
9,948,174 |
|
| Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | | | 1 | 2 | 3 | 4 | | 5 | 6 | 7 | 8 | 9 | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 18 | | 19 | 20 | 21 | 22 | 23 | 24 | 25 | | 26 | 27 | 28 | 29 | | | |
|
|
|
|
|
Reviews
|
Views
|
Date product posted
|
|
0
|
10787
|
Sun July 27, 2008
|
|
|
Recommended By
|
Average Price
|
Average Rating
|
|
No recommendations
|
None indicated
|
None indicated
|
|
|
|
|
|
Description:
|
The threaded caps are left hand threads so turn it to the right to remove. Grips are glued to bar on clutch side and throttle sleeve on throttle side. Check out HAND CONTROLS in the accessories section for replacement throttle sleeves.
Vulcan stock grips are held on with a left hand thread grip cap - so you need to turn to the RIGHT to remove. The clutch side grip is glued to the bar. You can cut the grip or use a long shank narrow tip screw driver to work the glue loose.
The throttle side also has a cap but the grip is glued to a sleeve which floats on the bar. The best way to remove this grip, other than removing the sleeve is to cut the grip.
|
|
Keywords:
|
Vulcan hand grips
|
|
Find the lowest price for the :
|
|
|
|
|
|
|
|
;)
Registered: July 2008