|
|
K&N Filter Cleaning Tips
posted by Chief
Most K&N OEM replacement air filters will normally
require cleaning and re-oiling every 50,000
miles.
Servicing your K&N Filter is simple; just follow
the 4 easy steps below.
|
4912
|
None
|
Thu April 28, 2011 12:48pm
|
No reviews
|
|
|
How to Adjust the Chain on an 800 Drifter
posted by Chief
Unlike its shaft-driven 1500cc counterpart,
Kawasaki's Drifter 800 features a chain drive to
propel the rear wheel. Regular chain tension
adjustments are made using the chain ...
|
2064
|
None
|
Sun January 30, 2011 2:29am
|
No reviews
|
|
|
Indian Motocycle Company 1953 Indian Chief Catalog
posted by Chief
This is the OEM parts and accessories catalog for
the 1953 Indian Chief.
|
6188
|
None
|
Thu January 13, 2011 7:22pm
|
No reviews
|
|
|
Saddlebag Quick Removal System Saddlemen part number: 3501-0336
posted by stipson
Bought this product at Cruisercustomizing.com and
fitted it to my OEM saddlebag brackets on my
Drifter 1500 with two-up seat. The OEM bags fit
very well and are easier to remo ...
|
4658
|
None
|
Thu May 20, 2010 11:31am
|
No reviews
|
|
|
Techlusion TFI
posted by Chief
Any power sports vehicle comes equipped with an
ECU map developed by the OEM manufacturer to pass
federal regulations. The stock ECU map does allow
for small fuel changes to c ...
|
10667
|
None
|
Fri May 7, 2010 4:13pm
|
No reviews
|
|
|
Cobra Oil Filler Cap
posted by Chief
Cobra Billet Oil Cap
Designed to replace unsightly stock oil caps
Cobra's best billet bits are machined right and
made to fit just like they came from the OEM
Made in the U ...
|
7927
|
None
|
Tue May 4, 2010 12:26pm
|
No reviews
|
|
|
Kawasaki OEM Riser height
posted by Chief
Vulcan Drifter riser height is 2" from centerline
of bar to mounting base.
|
4408
|
None
|
Sun April 18, 2010 4:05pm
|
No reviews
|
|
|
Ted's Design Dresser Bars
posted by Chief
These bars were designed and built with three
specific objectives:
PROTECTION – not just decoration. 1-1/8 x .093
heavy walled tubing that is roll die formed to
prevent fl ...
|
5726
|
None
|
Mon April 5, 2010 5:30pm
|
No reviews
|
|
|
Saddlebag Mounting Setups and Hardware Sources
posted by Chief
Information on various saddlebag setups and mods
including:
1. the kawasaki oem saddlebag mounting system.
Pictures, part numbers and sources if any.
2. Osprey bags and ...
|
4498
|
None
|
Fri March 12, 2010 2:05pm
|
No reviews
|
|
|
Kuryakyn Mechanical Throttle Cruise Assist
posted by Chief
•This is the simplest and cleanest looking
throttle position holder available
•Attaching to the end of your handlebars, this
beauty looks like a bar end weight
•Simply ...
|
6605
|
None
|
Thu December 10, 2009 6:03pm
|
No reviews
|
|
|
OEM Clutch Slip/Dragging after clutch replacement
posted by Chief
I've been exchanging e-mails with someone who'd
had a dealer change his clutch pack and spring.
Since the work was done the clutch had worked fine
when the bike was cold but ...
|
8808
|
None
|
Tue August 19, 2008 11:25am
|
No reviews
|
|
|
Rivco 30-Amp Electric Relay
posted by Chief
This American-made, completely sealed relay will
protect light-duty OEM wiring and switches (horn
button) from damage when adding accessories that
draw high amounts of current ...
|
28621
|
None
|
Sun August 17, 2008 1:20pm
|
No reviews
|
