|
|
Kawasaki Vehicle Down Sensor
posted by Chief
Recalled Component
FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
Recall Date
April 15th, 1999
Units Effected
2,779
NHTSA Campaign Number
99V067000
Manufacturer
KAW ...
|
1886
|
None
|
Thu April 21, 2011 6:15pm
|
No reviews
|
|
|
Fuel - Which grade Gasoline to use in a drifter...
posted by Chief
I'm glad you asked. I wanted to create a sticky
post on this subject anyway.
GENERAL INFO:
In the USA, all vehicle gasoline is unleaded and
is available in several grad ...
|
3475
|
None
|
Wed March 16, 2011 12:37pm
|
No reviews
|
|
|
Kawasaki Vulcan TPS adjustment
posted by Chief
The procedure outlined here involves rotating the
Throttle Position Sensor (TPS) from the factory
setting to “tell” the ECU that the engine getting
more intake air than it act ...
|
1666
|
None
|
Tue June 1, 2010 7:47pm
|
No reviews
|
|
|
Techlusion TFI
posted by Chief
Any power sports vehicle comes equipped with an
ECU map developed by the OEM manufacturer to pass
federal regulations. The stock ECU map does allow
for small fuel changes to c ...
|
10695
|
None
|
Fri May 7, 2010 4:13pm
|
No reviews
|
|
|
Thunder Mfg Power Commander for VN1500 Drifter
posted by Chief
The PC is a fuel injection and ignition timing (on
some models) adjustment unit that plugs "inline"
with the bikes' stock ECU. The PC uses original
equipment style connectors ...
|
10989
|
None
|
Fri May 7, 2010 4:06pm
|
No reviews
|
|
|
Kawasaki 800 Tank Vapor Lock
posted by Chief
On the Drifter 800, there has been reported
problems of the bike sputtering and behaving as
though it were running low on fuel despite having
full tanks.
The situation cou ...
|
6475
|
None
|
Tue March 9, 2010 1:24pm
|
No reviews
|
|
|
Power Commander 1500 Drifter/Classic Maps for PCIII
posted by Chief
This is a map for the Power Commander PCIII.
Designed for Classic and Drifter 1500.
|
11842
|
None
|
Mon November 10, 2008 4:10pm
|
No reviews
|
|
|
Rivco Universal Trailer Isolator Harness
posted by Chief
This isolator unit is designed to prevent any
damage or malfunction of electronic ignition, fuel
injection, ABS braking systems and other sensitive
electrical components on mo ...
|
11748
|
None
|
Sun August 17, 2008 1:18pm
|
No reviews
|
|
|
Gman Industries The Bully 1500 Fuel Injection Controller
posted by Chief
'The ‘Bully 1500’ allows the rider to adjust up to
6 different modes at anytime, no tools required.
This provides an easy, accurate way to ‘fine tune’
or ‘tweak’ the fuel inje ...
|
10570
|
10.00
|
Sat August 9, 2008 12:57am
|
1 reviews
|
|
|
Tip - Method for flushing radiator without removing fuel/gas tank.
posted by Chief
Method for flushing radiator without removing
fuel/gas tank.This is a shortcut for the tank
portion. Actual coolant replacement etc is not
discussed.Rick
|
7938
|
None
|
Sun July 27, 2008 1:23am
|
No reviews
|
|
|
Pet Cock Positioning Pet Cock Positioning
posted by Chief
The pet cock on the 800 drifter has 3 positions…
PRI (Prime); RES (Reserve) and ON. This is a
vacuum operated valve so when the bike is off, the
valve is automatically OFF. Us ...
|
16116
|
None
|
Sat July 26, 2008 11:34pm
|
No reviews
|
|
|
Kawasaki Cold Idle Fix
posted by Chief
Information for correcting cold idle problems if
you've removed the cold idle solenoids.
|
18054
|
None
|
Sat July 26, 2008 3:00am
|
No reviews
|
